Expanding my setup - choosing DACs (Helios vs Ether Dream)

General
21

Thanks @mathijslaser

for the interlock situation I can look at the rj45 interlock terminators of the different brand lasers and see they are wired differently.

I’m wondering if I could make a short rj45 socket and plug cable that swops over the offending pins? and put this in place before the Emma laser - and then another that swops them back and put this after - if there are more knight lasers in the chain afterwards.

I would need to get this made as I don’t know much about rj45 wiring.

22

I think you talk about emergency cut as interlock is the key lock.

I developed a device to control the emergency block for multiple lasers over one button. As long as it’s just a close/cut control I can realize it on every pin combination.