# Select all beam zones within a laser in output to resize all the same amount/ratio

**URL:** <https://forum.liberationlaser.com/t/select-all-beam-zones-within-a-laser-in-output-to-resize-all-the-same-amount-ratio/2136>\
**Category:** Ideas and Suggestions\
**Tags:** request\
**Created:** [9 April 2026 14:54 UTC](https://forum.liberationlaser.com/t/select-all-beam-zones-within-a-laser-in-output-to-resize-all-the-same-amount-ratio/2136 "2026-04-09T14:54:12Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kevin\_T](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/kevin_t/32/1454_2.png) [@Kevin\_T](https://forum.liberationlaser.com/u/Kevin_T)\
**Post date:** [9 April 2026 14:54 UTC](https://forum.liberationlaser.com/t/select-all-beam-zones-within-a-laser-in-output-to-resize-all-the-same-amount-ratio/2136/1 "2026-04-09T14:54:12Z")

</div>

I’m working with a 3 laser output project that has 20 beams, 6-7 in each laser output. It would be pretty swell if I could could select all and grab a corner dot while holding shift (or not) and have them all resize the same ratio. Just a thought. Thanks for everything you do, @seb !

---

<div class="post-metadata">

**Author:** ![seb](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/seb/32/3_2.png) [@seb](https://forum.liberationlaser.com/u/seb)\
**Post date:** [9 April 2026 15:08 UTC](https://forum.liberationlaser.com/t/select-all-beam-zones-within-a-laser-in-output-to-resize-all-the-same-amount-ratio/2136/2 "2026-04-09T15:08:28Z")

</div>

Hey Kevin,

Good question - but I think this might be pointing to something a bit deeper in how you’ve got things set up.

If you’ve got **6–7 beam zones per laser** , that’s a bit unusual. In most cases, zones are used more as _output regions_ (e.g. one per physical area or purpose), rather than lots of individual beam placements inside a single laser.

It sounds like you might be using zones to position individual beams, when that’s usually better handled **inside the clip itself** (or via the effects / node system). Zones are generally for mapping content _to_ lasers, not building the content layout.

So before adding multi-zone scaling tools, I’d suggest taking a step back and checking your workflow - there’s probably a simpler way to achieve what you’re after that will be much easier to manage long-term.

If you can share a bit more about what you’re trying to create visually, I’m happy to suggest a cleaner setup.

Seb