# Scale & Automation

**URL:** <https://forum.liberationlaser.com/t/scale-automation/2211>\
**Category:** General\
**Created:** [3 May 2026 14:46 UTC](https://forum.liberationlaser.com/t/scale-automation/2211 "2026-05-03T14:46:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![David\_Eames](https://avatars.discourse-cdn.com/v4/letter/d/edb3f5/32.png) [@David\_Eames](https://forum.liberationlaser.com/u/David_Eames)\
**Post date:** [3 May 2026 14:46 UTC](https://forum.liberationlaser.com/t/scale-automation/2211/1 "2026-05-03T14:46:56Z")

</div>

Hi Everyone,

Playing with scale and the various ways in which an image/cue can be altered.

Is it possible to automate a scale change? Say, for instance, if I want a logo to gradually become bigger or smaller over the course of a 5-10s clip? The “scale” node seems obvious enough, but I don’t see a way to automate an action over time or work it into the clip behaviors.

Thanks!

David

---

<div class="post-metadata">

**Author:** ![Eyes2theSkies](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/eyes2theskies/32/1754_2.png) [@Eyes2theSkies](https://forum.liberationlaser.com/u/Eyes2theSkies)\
**Post date:** [3 May 2026 15:00 UTC](https://forum.liberationlaser.com/t/scale-automation/2211/2 "2026-05-03T15:00:25Z")

</div>

Attached a saw wave - set it to repeat once on the Oscillator. Attach to Scale node XY, X only or y only. Setup a second saw for X / Y independence.

If you put the Position node into 3D mode, Z offers a similar type of effect.