# DMX over USB to DMX Controller

**URL:** <https://forum.liberationlaser.com/t/dmx-over-usb-to-dmx-controller/2349>\
**Category:** Support\
**Created:** [28 May 2026 16:58 UTC](https://forum.liberationlaser.com/t/dmx-over-usb-to-dmx-controller/2349 "2026-05-28T16:58:24Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![cdilija](https://avatars.discourse-cdn.com/v4/letter/c/ad7895/32.png) [@cdilija](https://forum.liberationlaser.com/u/cdilija)\
**Post date:** [28 May 2026 16:58 UTC](https://forum.liberationlaser.com/t/dmx-over-usb-to-dmx-controller/2349/1 "2026-05-28T16:58:24Z")

</div>

Hi Seb, I’m just wondering is it possible to connect Liberation with USB to DMX controller? …maybe it’s resolved issue earlier, but I could not find it.

---

<div class="post-metadata">

**Author:** ![nskaane](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/nskaane/32/811_2.png) [@nskaane](https://forum.liberationlaser.com/u/nskaane)\
**Post date:** [28 May 2026 23:48 UTC](https://forum.liberationlaser.com/t/dmx-over-usb-to-dmx-controller/2349/2 "2026-05-28T23:48:42Z")

</div>

What DMX to usb adapter is it? Theres no native “Liberation” console that has a DMX interface so the only way is dmx over usb. The Entec ones work well

---

<div class="post-metadata">

**Author:** ![Enablers.inc](https://avatars.discourse-cdn.com/v4/letter/e/dec6dc/32.png) [@Enablers.inc](https://forum.liberationlaser.com/u/Enablers.inc)\
**Post date:** [29 May 2026 00:08 UTC](https://forum.liberationlaser.com/t/dmx-over-usb-to-dmx-controller/2349/3 "2026-05-29T00:08:51Z")

</div>

Liberation can output artnet & sACN over ethernet to an ethernet-based artnet/sACN node

---

<div class="post-metadata">

**Author:** ![seb](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/seb/32/3_2.png) [@seb](https://forum.liberationlaser.com/u/seb)\
**Post date:** [29 May 2026 09:41 UTC](https://forum.liberationlaser.com/t/dmx-over-usb-to-dmx-controller/2349/4 "2026-05-29T09:41:49Z")

</div>

Yes Artnet only at the moment I’m afraid. Although someone here [vibe coded an adaptor that presented an Entec USB device as ArtNet](https://forum.liberationlaser.com/t/dmx-lights/1477/4) - that’s probably worth looking into.

All the best

Seb

---

<div class="post-metadata">

**Author:** ![nskaane](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/nskaane/32/811_2.png) [@nskaane](https://forum.liberationlaser.com/u/nskaane)\
**Post date:** [29 May 2026 13:34 UTC](https://forum.liberationlaser.com/t/dmx-over-usb-to-dmx-controller/2349/5 "2026-05-29T13:34:50Z")

</div>

Oh wow my bad OP. I totally thought it was fully supported by Enteec