# DMX Lights **URL:** \ **Category:** Support\ **Created:** [12 October 2025 07:24 UTC](https://forum.liberationlaser.com/t/dmx-lights/1477 "2025-10-12T07:24:20Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![carldickson](https://avatars.discourse-cdn.com/v4/letter/c/dec6dc/32.png) [@carldickson](https://forum.liberationlaser.com/u/carldickson)\ **Post date:** [12 October 2025 07:24 UTC](https://forum.liberationlaser.com/t/dmx-lights/1477/1 "2025-10-12T07:24:20Z")
Hi, Ive looked at the forums and im a little confused about controlling DMX lights. My wife wants to control the laser and par cans at once. From what I can see this software can do that, correct? If so I have a ENTTEC Dmx USB Pro, can it use that? If so I cant see where to select the device in the software. Thanks ---
**Author:** ![Eyes2theSkies](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/eyes2theskies/32/1754_2.png) [@Eyes2theSkies](https://forum.liberationlaser.com/u/Eyes2theSkies)\ **Post date:** [12 October 2025 10:57 UTC](https://forum.liberationlaser.com/t/dmx-lights/1477/2 "2025-10-12T10:57:20Z")
Negative on the enttec. Liberation only does artnet therefore you’ll need a different node. ---
**Author:** ![seb](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/seb/32/3_2.png) [@seb](https://forum.liberationlaser.com/u/seb)\ **Post date:** [12 October 2025 11:50 UTC](https://forum.liberationlaser.com/t/dmx-lights/1477/3 "2025-10-12T11:50:23Z")
Hi Carl, Yes, you can absolutely control DMX lights and fixtures directly from Liberation. I’m still writing that section of the manual, but this page gives you a good overview to get started: [DMX Control Introduction](https://docs.liberationlaser.com/dmx-control/introduction) Liberation uses Art-Net, so you’ll need an Art-Net node rather than a USB DMX interface. I recommend the Showtec Net-2/3 (or Net-2/5 if you prefer 5-pin DMX). There are cheaper Chinese options around too, but I haven’t personally tested those. Once you have your Art-Net device connected, just: 1. Enter its IP address in the Art-Net settings panel. 2. Set up your lighting fixture profile in the DMX Zones panel. From there, you can send any clip to your DMX fixture, and it’ll interpret the clip’s content into DMX channels - RGB for simple lights like PAR cans, and position or movement data for moving heads. Let me know if you have any more questions or if I can help more, Cheers! Seb ---
**Author:** ![carldickson](https://avatars.discourse-cdn.com/v4/letter/c/dec6dc/32.png) [@carldickson](https://forum.liberationlaser.com/u/carldickson)\ **Post date:** [12 October 2025 19:00 UTC](https://forum.liberationlaser.com/t/dmx-lights/1477/4 "2025-10-12T19:00:26Z")
Thanks for the reply, After digging around in the interface last night I gathered it wouldnt output USB. So I got my friendly AI agent to create an Art-net to USB converter in python. So far it works really well. Thanks ---
**Author:** ![Mitchell\_Lems](https://avatars.discourse-cdn.com/v4/letter/m/7c8e57/32.png) [@Mitchell\_Lems](https://forum.liberationlaser.com/u/Mitchell_Lems)\ **Post date:** [15 October 2025 19:37 UTC](https://forum.liberationlaser.com/t/dmx-lights/1477/5 "2025-10-15T19:37:12Z")
Please do share haha! Very interested in this. ---
**Author:** ![carldickson](https://avatars.discourse-cdn.com/v4/letter/c/dec6dc/32.png) [@carldickson](https://forum.liberationlaser.com/u/carldickson)\ **Post date:** [16 October 2025 08:52 UTC](https://forum.liberationlaser.com/t/dmx-lights/1477/6 "2025-10-16T08:52:56Z")
I’ll tidy it up and do some docs. Ive got it outputting to multi RGB lights via USB and accepts midi input. Currently using a Korg nanoKONTROL2 to trigger blackouts, and master / individual light brightness.The Artnet sync with Liberation works really well. ---
**Author:** ![carldickson](https://avatars.discourse-cdn.com/v4/letter/c/dec6dc/32.png) [@carldickson](https://forum.liberationlaser.com/u/carldickson)\ **Post date:** [24 October 2025 10:15 UTC](https://forum.liberationlaser.com/t/dmx-lights/1477/7 "2025-10-24T10:15:36Z")
@seb Im trying to get this play nicely with MacOS and PS’s and ive been Jumping between them with De-authorising / Aurthorising on a few PC’s/Mac’s. Will i get flageged for dodgy behavour? ---
**Author:** ![seb](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/seb/32/3_2.png) [@seb](https://forum.liberationlaser.com/u/seb)\ **Post date:** [24 October 2025 10:23 UTC](https://forum.liberationlaser.com/t/dmx-lights/1477/8 "2025-10-24T10:23:55Z")
Hey Carl, No worries at all - you won’t get flagged for anything dodgy; It’s totally fine to switch between Mac and PC and to de-authorise / re-authorise as needed. Seb