# Disabling zone for all scenes **URL:** \ **Category:** General\ **Created:** [9 June 2025 22:03 UTC](https://forum.liberationlaser.com/t/disabling-zone-for-all-scenes/1165 "2025-06-09T22:03:50Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![djevo1](https://avatars.discourse-cdn.com/v4/letter/d/c2a13f/32.png) [@djevo1](https://forum.liberationlaser.com/u/djevo1)\ **Post date:** [9 June 2025 22:03 UTC](https://forum.liberationlaser.com/t/disabling-zone-for-all-scenes/1165/1 "2025-06-09T22:03:50Z")
Is there a way to deselect a zone from multiple scenes? I have tried shift clicking and higlighting multiple and there isn’t a way to deselect the zone for multiple clips. Am I missing something? ---
**Author:** ![seb](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/seb/32/3_2.png) [@seb](https://forum.liberationlaser.com/u/seb)\ **Post date:** [9 June 2025 22:40 UTC](https://forum.liberationlaser.com/t/disabling-zone-for-all-scenes/1165/2 "2025-06-09T22:40:44Z")
Yes! You can use **Group buttons** to quickly assign zones (and X/Y flip) for multiple clips at once. From the manual: > The Group buttons are down the right-hand side of the clip deck. When you activate one, you can: > > - Assign clips to a group > - Change zone settings and X/Y flip for all clips in the group To use it: - Press and hold the Group button on your APC40, or click the on-screen Group button. - While the group button is active, press clips to assign them to the group. (You can also right-click a clip to assign it.) - With the group active, look at the zone buttons: - **OFF** = zone not set in any group clip - **FLASHING** = zone set in some clips - **ON** = zone set in all clips - Press a zone button to toggle it on or off for all clips in the group. Same applies for X/Y flip settings too. Full details here: 🔗 [docs.liberationlaser.com/clips/groups#the-group-buttons](https://docs.liberationlaser.com/clips/groups#the-group-buttons) Hope this helps! Seb