# ArtNET controller recommendation **URL:** \ **Category:** General\ **Created:** [17 April 2026 22:50 UTC](https://forum.liberationlaser.com/t/artnet-controller-recommendation/2176 "2026-04-17T22:50:36Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![stevewallet](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/stevewallet/32/1028_2.png) [@stevewallet](https://forum.liberationlaser.com/u/stevewallet)\ **Post date:** [17 April 2026 22:50 UTC](https://forum.liberationlaser.com/t/artnet-controller-recommendation/2176/1 "2026-04-17T22:50:36Z")
Hi, actually I use QLC+ for my dmx devices and now I want to switch for some of them to liberation. as Liberation only supports ArtNET dmx I’m looking for a controller. An recommendation which one I should choose? It should be not to expensive but reliable. thanks 🙏 Steve ---
**Author:** ![Kevin\_T](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/kevin_t/32/1454_2.png) [@Kevin\_T](https://forum.liberationlaser.com/u/Kevin_T)\ **Post date:** [18 April 2026 07:41 UTC](https://forum.liberationlaser.com/t/artnet-controller-recommendation/2176/2 "2026-04-18T07:41:45Z")
Single universe or more?@stevewallet ---
**Author:** ![stevewallet](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/stevewallet/32/1028_2.png) [@stevewallet](https://forum.liberationlaser.com/u/stevewallet)\ **Post date:** [18 April 2026 08:02 UTC](https://forum.liberationlaser.com/t/artnet-controller-recommendation/2176/3 "2026-04-18T08:02:39Z")
Single universe should be fine. ---
**Author:** ![markp](https://avatars.discourse-cdn.com/v4/letter/m/b3f665/32.png) [@markp](https://forum.liberationlaser.com/u/markp)\ **Post date:** [19 April 2026 10:18 UTC](https://forum.liberationlaser.com/t/artnet-controller-recommendation/2176/4 "2026-04-19T10:18:46Z")
Showtec Net2 - I’ve used numerous different ones in the past and like the build quality and reliability of this - used it with QLC+, MagicQ, xLights, etc. Love that it also supports PoE for power, and you can run two universes from it - I’ve used mine outputting from Artnet on one port and sACN unicast from another controller to the other. The OLED display on it makes things so much easier to manage/configure and check status. ---
**Author:** ![seb](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/seb/32/3_2.png) [@seb](https://forum.liberationlaser.com/u/seb)\ **Post date:** [19 April 2026 18:14 UTC](https://forum.liberationlaser.com/t/artnet-controller-recommendation/2176/5 "2026-04-19T18:14:44Z")
+1 for the showtec, it’s a bit confusing at first but then all DMX things are haha ---
**Author:** ![Kevin\_T](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/kevin_t/32/1454_2.png) [@Kevin\_T](https://forum.liberationlaser.com/u/Kevin_T)\ **Post date:** [21 April 2026 04:41 UTC](https://forum.liberationlaser.com/t/artnet-controller-recommendation/2176/6 "2026-04-21T04:41:40Z")
If you’re in the US, you have to pay for shipping & import fees on the Showtec Net2. Otherwise I would have gotten that. Plus it’s a 2 uninverse. DMXking eDMX1 MAX — This is what I went with for my Liberation DMX setup. Solid build quality from a New Zealand manufacturer, reliable firmware (v4.7), and rock-solid output once configured. Supports Art-Net 4, sACN (ANSI E1.31), and E1.20 RDM on a single universe. The XLR port is individually configurable as DMX-OUT or DMX-IN, which is nice for flexibility. USB-C powered so you can run it off practically any USB port or charger. Compact form factor. Works great with the DMXking eDMX Configuration Utility (available for both Mac and PC). The utility handles node discovery, port configuration, universe assignment, firmware updates, and has a built-in show recorder that can record from any source (Art-Net, sACN, DMX-IN) and play back to ports or network. You can also configure RDM discovery settings if your fixtures and software support it. Liberation does not support RDM at this time. You can get the item for an outlet on eBay that has 100% seller profile reviews for $182 or maybe lower if you make an offer. I bought it with buy now from this seller. > **[DMXking eDMX1 MAX Ethernet ArtNet/sACN to DMX Controller 1 Universe 3-Pin...](https://www.ebay.com/itm/136881609684?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ez_QHcQkQvi&sssrc=2047675&ssuid=0w9pogatrm-&stype=1&widget_ver=artemis&media=COPY)** > > You choose 3-pin or 5-pin XLR so no inline adapters are required. Both DMX512 output and DMX512 input functions are supported along with E1.20 RDM. Designed and manufactured in New Zealand to the highest standards the eDMX1 is the perfect first step... ---
**Author:** ![Robert\_Koren](https://avatars.discourse-cdn.com/v4/letter/r/eb9ed0/32.png) [@Robert\_Koren](https://forum.liberationlaser.com/u/Robert_Koren)\ **Post date:** [21 April 2026 06:28 UTC](https://forum.liberationlaser.com/t/artnet-controller-recommendation/2176/7 "2026-04-21T06:28:36Z")
i`m absoluteli new in artnet Hardware Would this work correctly with liberation (i `m looking for working budget option for one universe only and europe warehouse) ? > **[Rordigo Ethernet DMX Converter, Bi-Directional Controller, ArtNet 1024, 3...](https://www.amazon.de/-/en/Ethernet-Converter-Bi-Directional-Controller-Earthnet/dp/B0D3DXTYPK)** > > Rordigo Ethernet DMX Converter, Bi-Directional Controller, ArtNet 1024, 3 Output, Lan Earthnet/DMX Console, Artnet EU Plug : Amazon.de: Musical Instruments & DJ Thanks. ---
**Author:** ![stevewallet](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.liberationlaser.com/stevewallet/32/1028_2.png) [@stevewallet](https://forum.liberationlaser.com/u/stevewallet)\ **Post date:** [21 April 2026 10:10 UTC](https://forum.liberationlaser.com/t/artnet-controller-recommendation/2176/8 "2026-04-21T10:10:56Z")
Thanks for all that input. I ordered a Showtec Net2 now.